How to Repair a Leaking Roof
Detect the Roof Leak
If you notice water stains across your ceilings or run-down walls, it can be an indication of a roof leak. Fixing roof leaks can be easy, but tracking down the leak is the challenging part. To detect a roof leak, you may wait until it rains to pinpoint the leak area or follow the water damage inside your home. If you have an upper room, head up there and look for water stains or forms. Note the location of any proof you found. At that point, check the corresponding spot on the exterior of your home.
Examine Your Roof for General Wear and Tear
Search for twisted, split, or lost shingles at the leak location and assess your roof's general condition. See if there are some failing or lost shingles, wide crevices where roofing fabric meets vents or a chimney, and other signs of far-reaching wear and tear.
Straighten and Reattach Curled Shingles
Over time, the edges of asphalt shingles often start to twist. Carefully smooth out any curled-back shingles and then utilize a caulking weapon to apply a roof sealant spot beneath the raised corners. Squeeze the shingle down, then apply a trowel to close the shingle's edges with roof cement.
Repair a Clean Crack with Roof Sealant
There is no need to replace a shingle with a clean tear. Instead, apply a thick dot of roof sealant beneath the break with a caulking weapon. Press the shingle down, then use another globule of adhesive over the gap. Utilize a putty cut to spread the beat dot over both edges of the hole.
Replace Broken or Missing Shingles
If a portion or an entire shingle is lost, head to the equipment store to look for a coordinating substitute. To remove the broken shingle, carefully lift the shingle's edges over it with a pry bar. Utilize a hammer to expel the nails at the fractured shingle's four corners, slide it out, then rub the range underneath to evacuate any remaining material cement.